How to Use the Imagimake Window Art Princess Kit — Beginner’s Guide

What’s in the Box

• 12 interchangeable pieces for Princesses, Mermaids & Fairies
• 4 mini suncatchers (Unicorn, Butterfly, Rainbow cloud & Castle)
• 11 peelable glass paint tubes (including 4 glitter tubes, 5 ml each)
• 1 glass liner (black outline tube)
• 7 suction cups
• 1 design book
• 1 acetate sheet

Preparation

1. Find a clean, flat working area with good light and protection for the surface (newspaper or a craft mat).
2. Wash hands and wipe the acetate sheet lightly if dusty. Make sure the window area you will use is clean and dry.
3. Open the kit and remove the safety caps from each paint tube just before use. Keep tubes upright when not in use.
4. Adult supervision is recommended for children under 8 and when handling small parts like suction cups.

Basic Step-by-Step Painting (Using the Acetate & Design Book)

1. Choose a design from the design book.
2. Place the acetate sheet over the chosen design and hold or tape the acetate gently in place.
3. Use the glass liner (black outline) to trace the outline of the design first. Squeeze gently and keep a steady hand. Let the outline dry slightly (a few minutes) so it becomes raised.
4. Fill the areas with peelable glass paint tubes. Squeeze slowly and fill each section without pressing too hard to avoid blobs.
5. Use glitter paints where you want sparkle — dot lightly or fill small areas for best results.
6. Allow the painted acetate to dry fully. Typical surface-dry time is 1–3 hours depending on paint thickness; allow up to 24 hours for best peelability in cool/damp conditions.
7. Once fully dry and firm to the touch, carefully peel the painted design off the acetate like a sticker.
8. Attach the peeled design to a clean, dry window using a suction cup (if provided) or stick directly to the glass. Smooth gently to remove air bubbles.

Assembling & Interchanging the Characters (Princesses, Mermaids, Fairies)

• The kit parts (hair, face, body etc.) are designed to fit together easily. Align the tabs or slots and press gently until they click into place.
• To create different characters, mix and match hair, face, and body pieces. The kit supports up to 64 unique combinations — try different color schemes for more variety.
• If you paint parts separately, ensure each painted piece is completely dry before assembly to avoid smudging.

Hanging Mini Suncatchers on Windows

1. Choose a clean, dry window that receives good light.
2. Press the suction cup firmly onto the glass to remove air pockets.
3. Hang the suncatcher or use the suction cup hook/slot provided. If a sticker-style suncatcher is used, press it directly onto the glass and smooth from the center outward.
4. For best visual effect, place suncatchers where sunlight will pass through them (but avoid prolonged direct hot sun on very thin materials).

Drying & Curing Times

• Surface dry: usually 1–3 hours (depends on paint thickness and room conditions).
• Fully cured/peel-ready: allow up to 24 hours for cool or humid environments.
• Thicker paint layers require longer drying. Be patient — premature peeling can deform the design.

Cleaning, Storage & Care

• Close paint tube caps tightly after each use and store upright in a cool, dry place.
• Clean the glass liner tip with a damp cloth before the paint dries to avoid clogging. If it clogs, gently warm the tip under warm (not hot) water and squeeze to clear.
• Wipe windows gently with a soft, damp cloth when removing suncatchers. Avoid sharp tools that could scratch the glass or artwork.
• Store unused pieces and completed suncatchers flat in a box to avoid bending or warping.

Safety Tips

• This kit uses non-toxic paints, but it is not edible. Do not ingest paints or pieces.
• Adult supervision recommended for children under 8 and whenever small parts are used.
• Avoid contact with eyes; if paint gets into eyes, rinse well with water and seek medical advice if irritation persists.
• Keep the kit away from very young children who might put pieces in their mouths.

Troubleshooting & Tips

• Bubbles in paint: squeeze more slowly and avoid overfilling areas; use a toothpick to pop small bubbles before drying.
• Paint too thin or runny: allow thicker layers or use less solvent-damp areas. Let each layer dry before adding more.
• Design won’t peel cleanly: ensure the paint is fully cured (up to 24 hours). If edges lift, gently loosen with a fingernail and peel slowly.
• Uneven outlines: practice with the glass liner on spare acetate. Keep a steady hand and squeeze gently for even lines.

Fun Ideas for Beginners

• Start with simple shapes (stars, hearts) to practice the liner and filling technique.
• Make matching sets — a princess and a little unicorn — and hang them together on a window for a themed display.
• Use different light positions (morning vs. afternoon sun) to see how colors change with light.
• Gift finished suncatchers as handmade window stickers for friends or family.

Enjoy creating a window dreamland — take your time, be creative, and have fun experimenting with colors and combinations!